Dunlop 6105 vs 6100 Frets: Narrow Tall or Jumbo?
Share
The Dunlop 6105 and 6100 are two of the most requested fret sizes for refrets and custom necks, and they share the same .055″ height. The only dimension that changes is width: .090″ for the 6105, .110″ for the 6100. That twenty-thousandths of an inch is the whole debate, so here is what it does and does not change.
Still on the fence? The Mbit Fret Guide compares both against your playing style, bend intensity and fretting pressure.
The Specs
| Dunlop 6105 | Dunlop 6100 | |
|---|---|---|
| Crown width | .090″ / 2.29 mm | .110″ / 2.79 mm |
| Crown height | .055″ / 1.40 mm | .055″ / 1.40 mm |
| Profile | Narrow tall | Jumbo |
| Jescar equivalent | 55090 | 57110 (.057″ tall) |
| Commonly found on | Modern Fender-style necks, many custom builds | Superstrats, rock and shred guitars |
What Feels the Same
Because height is identical, both give you the same clearance under the string. Bends, vibrato and fretting pressure feel very close. Both carry the same risk of pressing chords sharp if you have a heavy fretting hand.
What Changes With Width
6105: the narrower crown gives a more defined contact point. Players often describe it as precise, with a clean sense of where the note sits, and some find intonation a little more focused because the string leaves the fret at a sharper point. It feels closer to vintage wire under the finger while keeping modern height.
6100: the wider crown feels bigger and smoother, especially on slides and legato runs. More metal also means wear spreads out and there is more crown to work with when leveling.
Which One I Would Point You Toward
If you grew up on vintage-style necks and want easier bends without the fret feeling big, the 6105 is the natural step. If you play legato, slide between positions a lot or simply like a substantial fret under your hand, the 6100 is hard to argue with. Neither is the better fret. They are two answers to two slightly different preferences, and I would rather you play both than trust a chart, mine included.
Frequently Asked Questions
Is the 6105 taller than the 6100?
No. Both are .055″ tall. The 6105 is narrower, .090″ versus .110″, which can make it look and feel taller.
Is 6105 good for bending?
Yes. It has full jumbo height, so bends feel easy, with a narrower contact point than the 6100.
Which is better for chords?
Neither has an edge on height. Players with a heavy fretting hand should be careful with both, since tall frets make it easier to press chords sharp.
Does the 6105 come in stainless steel?
Not from Dunlop, as far as I can find: its 6105 is nickel silver. The same .090″ × .055″ size is made in stainless as Jescar FW55090-S, which is the usual choice for a stainless narrow tall refret.
More Fret Wire Guides
Fret size chart · Fret sizes explained · Stainless vs nickel · Measure your frets · Tall frets and sharp chords
Or answer five questions in the free Mbit Fret Guide and it ranks 28 verified fret wire specs against how you actually play.